Cold drawn Steel is much in demand with its characteristics of being easily machinable & high aesthetics. With its functionality and size availability of 5mm-110mm , demand for cold-drawn products is consistently rising.

Available in various sizes and grades, these bars conform to different national and international standards. Cold drawn Steel has multiple benefits: it provides tighter tolerances and reduces machining losses; improved steel surface finish improves quality; improves straightness, increases mechanical properties; improves machinability and productivity, higher tool life, and enhanced machined finish. We offer superior quality Round Bars in various finish options.

• Length – up to 15 metres
• Hot Rolled (Black) Surface
• 100% Ultrasonically Tested
• Spot ground on fully ground condition
• Cold Sawable
• Grade confirmation through PMI testing with Handheld Spectrometers
• Free from Radioactive Elements
• Heat Treatment – Soft Annealing, Solution Annealing, Spheroidized Annealing, Oil and Water Quenching, Tempered & Normalized

Our Bright Bars are regularly used in:

• Pump Shafts
• Piston Shafts
• Cylinder Shafts 
• Valve Shafts 
• Boat Shafts
• Bearing Bars

Bright Square Steel Bars are cold processed products formed by deformation by passing the bar through a die. This aids in achieving the desired sizes of the bar with tighter tolerances of dimensions. Available in a vast size range from 6 mm to 63 mm, these bars have multiple uses. The surface finish of these bars is bright and free from any sort of surface defects. Mechanical properties of these bars are increased upon completion of drawing operations, depending on the reduction applied.

• Length – up to 6 metres
• Tolerances – h11, k12, k13
• Grit Polish as per customer’s request
• Heat Treatment – Solution Annealed, Oil & Water Quenched/ Tempered
• Bars End Finish – Chamfered Ends, Plain Ends without Burrs or Sharp Edges
• Specifications – As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.
• Grade confirmation through PMI testing with Hand-held Spectrometers
• Free from Radioactive Elements, Mercury & Lead Contamination

Our Square Bars are regularly used in:

• Rails
• Machine Components

Available in a different length, grades and finish options, Hex bars can be produced from Carbon, Alloy or Stainless Steel, depending on the specific requirement and use. Displaying astounding features like durability, stringent quality, super resistivity, higher hardness and corrosion resistance, these bars are a preferred choice across varied applications.

• Length – up to 6 metres
• Tolerances – h11, k12, k13
• Grit Polish as per Customer’s Request
• Heat Treatment – Solution Annealed, Oil & Water Quenched/ Tempered
• Bars End Finish – Chamfered Ends, Plain ends without Burrs or Sharp Edges
• Specifications – As per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc.
• Grade confirmation through PMI testing with Hand-held Spectrometers
• Free from Radioactive Elements, Mercury & Lead Contamination

Our Hex Bars are regularly used in:

• Nuts
• Bolts
• Hydraulics
• Machine Components

Bright Flat Steel Bars are cold-processed products. Formed by deformation, these bars pass through a die. Tight dimensional tolerance is the result of this process. With a bright surface finish, it exhibits enhanced mechanical properties. These bars cater to demands of iron and steel industry, adhering to stringent quality control measures and catering to different sizes as per specific requirements. The primary applications include tooling machinery and fine mechanics.

• Length – 2 metres – 6 metres (8 feet to 20 feet)
• Tolerances – h11 and ASTM A 484
• Length Tolerances – Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch)
• Surface Finish – Cold Drawn and Pickled Condition • Heat Treatment – Solution Annealed

Our Cold Drawn Flat Bars are regularly used in:

• Screw Machines
• Construction Equipment Manufacturing