Round Bars

Bright

The Right Steel

Round Bars

Bright

The Right Steel

Bright Round Bars

Cold drawn Steel is much in demand with its characteristics of being easily machinable & high aesthetics. With its functionality and size availability of 22-160 mm thickness, demand for cold-drawn products is consistently rising. Available in various sizes and grades, these bars conform to different national and international standards. Cold drawn Steel has multiple benefits: it provides tighter tolerances and reduces machining losses; improved steel surface finish improves quality; improves straightness, increases mechanical properties; improves machinability and productivity, higher tool life, and enhanced machined finish.

We offer superior quality Round Bars in various finish options.

Size Range:

22 – 160 mm (7⁄8″-41⁄2″)

Supply Conditions:

  • Length – up to 15 meters
  • Hot Rolled (Black) Surface
  • 100% Ultrasonically Tested
  • Spot ground on fully ground condition
  • Cold Sawable
  • Grade confirmation through PMI testing with Handheld Spectrometers
  • Free from Radioactive Elements, Mercury & Lead Contamination
  • Heat Treatment – Soft Annealing, Solution Annealing, Spheroidized Annealing, Oil and Water Quenching, Tempered & Normalized
  • Our Bright Bars are regularly used in:
    • Pump Shafts • Piston Shafts • Cylinder Shafts
    • Valve Shafts • Boat Shafts • Bearing Bars

Bright Round Bars

Cold drawn Steel is much in demand with its characteristics of being easily machinable & high aesthetics. With its functionality and size availability of 22-160 mm thickness, demand for cold-drawn products is consistently rising. Available in various sizes and grades, these bars conform to different national and international standards. Cold drawn Steel has multiple benefits: it provides tighter tolerances and reduces machining losses; improved steel surface finish improves quality; improves straightness, increases mechanical properties; improves machinability and productivity, higher tool life, and enhanced machined finish.

We offer superior quality Round Bars in various finish options.

Size Range:

22 – 160 mm (7⁄8″-41⁄2″)

Supply Conditions:

  • Length – up to 15 meters
  • Hot Rolled (Black) Surface
  • 100% Ultrasonically Tested
  • Spot ground on fully ground condition
  • Cold Sawable
  • Grade confirmation through PMI testing with Handheld Spectrometers
  • Free from Radioactive Elements, Mercury & Lead Contamination
  • Heat Treatment – Soft Annealing, Solution Annealing, Spheroidized Annealing, Oil and Water Quenching, Tempered & Normalized
  • Our Bright Bars are regularly used in:
    • Pump Shafts • Piston Shafts • Cylinder Shafts
    • Valve Shafts • Boat Shafts • Bearing Bars

Square Bars

Bright

The Right Steel

Square Bars

Bright

The Right Steel

Bright Square Bars

Bright Square Steel Bars are cold processed products formed by deformation by passing the bar through a die. This aids in achieving the desired sizes of the bar with tighter tolerances of dimensions. Available in a vast size range from 20 mm to 63 mm, these bars have multiple uses. The surface finish of these bars is bright and free from scale. Mechanical properties of these bars are increased upon completion of drawing operations, depending on the reduction applied. 

Size Range:

20 mm – 63 mm (0/8″–2 4/8″)

Supply Conditions:

  • Length: Up to 6 meters
  • Tolerances: h11, k12, k13
  • Grit polish: As per Customer’s request
  • Heat Treatment – Solution Annealed, Oil & Water Quenched/ Tempered Bars End Finish – Chamfered Ends, Plain Ends without Burrs or Sharp Edges

  • Specifications – As per EN, DIN, JIS, ASTM, BS, ASME, AISI

  • Grade confirmation through PMI testing with Handheld Spectrometers Free from Radioactive Elements, Mercury & Lead Contamination

  • Our Square Bars are regularly used in:
    • Rails • Machine Components

Bright Square Bars

Bright Square Steel Bars are cold processed products formed by deformation by passing the bar through a die. This aids in achieving the desired sizes of the bar with tighter tolerances of dimensions. Available in a vast size range from 20 mm to 63 mm, these bars have multiple uses. The surface finish of these bars is bright and free from scale. Mechanical properties of these bars are increased upon completion of drawing operations, depending on the reduction applied. 

Size Range:

20 mm – 63 mm (0/8″–2 4/8″)

Supply Conditions:

  • Length: Up to 6 meters
  • Tolerances: h11, k12, k13
  • Grit polish: As per Customer’s request
  • Heat Treatment – Solution Annealed, Oil & Water Quenched/ Tempered Bars End Finish – Chamfered Ends, Plain Ends without Burrs or Sharp Edges

  • Specifications – As per EN, DIN, JIS, ASTM, BS, ASME, AISI

  • Grade confirmation through PMI testing with Handheld Spectrometers Free from Radioactive Elements, Mercury & Lead Contamination

  • Our Square Bars are regularly used in:
    • Rails • Machine Components

Hex Bars

Bright

The Right Steel

Hex Bars

Bright

The Right Steel

Bright Hex Bars

Our wide range of Hexagon Bars come in a variety of length, grades and finish options. These bars are usually long, hexagon-shaped and generally made from stainless Steel. There are various grades of Steel, which are applied depending on the end-use of these bars. They can be made either from austenitic or ferritic grades of stainless Steel. As the corrosion resistance of austenitic stainless steel grades is high, these bars come to use. While in cases where the requirement is for a magnetic, wear-resistant, superior resistivity, higher hardness and more rigid stainless Steel, ferritic grades are used for such applications.

Size Range:

20 mm – 75 mm (0/8″-29/5″)

Supply Conditions:

  • Length: Up to 6 meters
  • Tolerances: h11, k12, k13
  • Grit polish: As per Customer’s request
  • Heat Treatment – Solution Annealed, Oil & Water Quenched/ Tempered
  • Bars End Finish – Chamfered Ends, Plain ends without Burrs or Sharp Edges
  • Specifications – As per EN, DIN, JIS, ASTM, BS, ASME, AISI
  • Grade confirmation through PMI testing with Handheld Spectrometers.
  • Free from Radioactive Elements, Mercury & Lead Contamination.
  • Our Hex Bars are regularly used in:
    • Nuts • Bolts • Hydraulics • Machine Components

Bright Hex Bars

Our wide range of Hexagon Bars come in a variety of length, grades and finish options. These bars are usually long, hexagon-shaped and generally made from stainless Steel. There are various grades of Steel, which are applied depending on the end-use of these bars. They can be made either from austenitic or ferritic grades of stainless Steel. As the corrosion resistance of austenitic stainless steel grades is high, these bars come to use. While in cases where the requirement is for a magnetic, wear-resistant, superior resistivity, higher hardness and more rigid stainless Steel, ferritic grades are used for such applications.

Size Range:

20 mm – 75 mm (0/8″-29/5″)

Supply Conditions:

  • Length: Up to 6 meters
  • Tolerances: h11, k12, k13
  • Grit polish: As per Customer’s request
  • Heat Treatment – Solution Annealed, Oil & Water Quenched/ Tempered
  • Bars End Finish – Chamfered Ends, Plain ends without Burrs or Sharp Edges
  • Specifications – As per EN, DIN, JIS, ASTM, BS, ASME, AISI
  • Grade confirmation through PMI testing with Handheld Spectrometers.
  • Free from Radioactive Elements, Mercury & Lead Contamination.
  • Our Hex Bars are regularly used in:
    • Nuts • Bolts • Hydraulics • Machine Components

Flat Bars

Bright

The Right Steel

Flat Bars

Bright

The Right Steel

Bright Flat Bars

Bright Flat Steel Bars are cold-processed products. Formed by deformation, these bars pass through a die. Tight dimensional tolerance is the result of this process. With a bright surface finish, it exhibits enhanced mechanical properties. These bars cater to demands of iron and steel industry, adhering to stringent quality control measures and catering to different sizes as per specific requirements. The primary applications include tooling machinery and fine mechanics.

Size Range:

25 mm to 70 mm
Thickness: 4.76 mm to 31.75 mm

Supply Conditions:

  • Length – 2 metres – 6 metres (8 feet to 20 feet)
  • Tolerances – h11 and ASTM A 484
  • Length Tolerances – Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch)
  • Surface Finish – Cold Drawn and Pickled Condition • Heat Treatment – Solution Annealed
  • Our Cold Drawn Flat Bars are regularly used in:
    • Screw Machines • Hydraulic fittings • Gears • Bushings
    • Fasteners • Cylinders • Pipe Fittings

Bright Flat Bars

Bright Flat Steel Bars are cold-processed products. Formed by deformation, these bars pass through a die. Tight dimensional tolerance is the result of this process. With a bright surface finish, it exhibits enhanced mechanical properties. These bars cater to demands of iron and steel industry, adhering to stringent quality control measures and catering to different sizes as per specific requirements. The primary applications include tooling machinery and fine mechanics.

Size Range:

25 mm to 70 mm
Thickness: 4.76 mm to 31.75 mm

Supply Conditions:

  • Length – 2 metres – 6 metres (8 feet to 20 feet)
  • Tolerances – h11 and ASTM A 484
  • Length Tolerances – Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch)
  • Surface Finish – Cold Drawn and Pickled Condition • Heat Treatment – Solution Annealed
  • Our Cold Drawn Flat Bars are regularly used in:
    • Screw Machines • Hydraulic fittings • Gears • Bushings
    • Fasteners • Cylinders • Pipe Fittings